Low-energy sponge-core bioreactor for reducing total nitrogen and antibiotic resistance burden in domestic wastewater
datasetposted on 01.01.2018 by MC Jong, JQ Su, JT Bunce, CR Harwood, JR Snape, YG Zhu, DW Graham
Datasets usually provide raw data for analysis. This raw data often comes in spreadsheet form, but can be any collection of data, on which analysis can be performed.
Inadequate sanitation can lead to the spread of infectious diseases and antimicrobial resistance (AMR) via contaminated water. Unfortunately, wastewater treatment is not universal in many developing and emerging countries, especially in rural and peri-urban locations that are remote from central sewers. As such, small-scale, more sustainable treatment options are needed, such as aerobic-Denitrifying Downflow Hanging Sponge (DDHS) bioreactors. In this study, DDHS reactors were assessed for such applications, and achieved over 79% and 84% removal of Chemical Oxygen Demand and Ammonium, respectively, and up to 71% removal of Total Nitrogen (TN) from domestic wastes. Elevated TN removals were achieved via bypassing a fraction of raw wastewater around the top layer of the DDHS system to promote denitrification. However, it was not known how this bypass impacts AMR gene (ARG) and mobile genetic element (MGE) levels in treated effluents. High-throughput qPCR was used to quantify ARG and MGE levels in DDHS bioreactors as a function of percent bypass (0, 10, 20 and 30% by volume). All systems obtained over 90% ARG reductions, although effluent ARG and TN levels differed among bypass regimes, with co-optimal reductions occurring at ~20% bypass. ARG removal paralleled bacterial removal rate, although effluent bacteria tended to have greater genetic plasticity based on higher apparent MGE levels per cell. Overall, TN removal increased and ARG removal decreased with increasing bypass, therefore co-optimization is needed in each DDHS application to achieve locally targeted TN and AMR effluent levels.