## Mode-1 ISW shoaling configuration file name = ./Thin_7L # Spatial Parameters Lx = 14.5 Ly = 0.1 Lz = 0.3 Nx = 4096 Ny = 1 Nz = 256 min_x = 0 min_y = 0 min_z = -0.3 # Expansion types type_x = FREE_SLIP type_y = FOURIER type_z = NO_SLIP mapped_grid = true # Physical Parameters g = 9.81 rot_f = 0.0e-3 rho_0 = 1026.0 visco = 1e-6 kappa_rho = 1e-7 kappa_tracer = 1e-7 # Problem Parameters (delta_rho is percentage) delta_rho = 0.019 pyc_loc = -0.07 h_halfwidth = 0.015 pyc_adj_loc = -0.1242 h_adj_halfwidth = 0.015 delta_x = 0.04 L_adj = 0.3 dye_thickness = 0.05 dye_halfwidth = 0.01 # Problem topography parameters hill_height = 0.3 hill_slope = 0.0333 hill_trans = 0.03 hill_end_dist = -0.0 # Temporal Parameters final_time = 130 plot_interval = 1 #dt_max = 0.0 # Restart Options restart = false restart_time = 0.0 restart_sequence = 0 restart_from_dump = false compute_time = -1 # Perturbation Parameter perturb = 1e-3 # Filter Parameters f_cutoff = 0.6 f_order = 2.0 f_strength = 20.0 # secondary diagnostics #compute_enstrophy = true #compute_dissipation = true #compute_BPE = true #compute_internal_to_BPE = true #compute_stresses_top = false compute_stresses_bottom = true